Image For Nokia C1 00 Sim card jumper
|Nokia C1 00 Simcard pcb|
This problem is may caused by a faulty charger or a faulty components on nokia c1-01 PCB board. This problem may sometimes happens if the device suffered wet or water damaged or just exist.
The solution below will show us the location of the particular components that needs to be check or by then replace if found damaged.
Nokia C1 Solution for C1-01 MIC microphone mouthpiece not working
If encountered to fix a Nokia C1-01 microphone problem, here's the solution that might possibly solved the problem. The Solution below shows the microphone module on the Nokia C1-01 PCB board that needs to check or replace if found damaged.
The MIC module is located and mounted at the bottom of the PCB board layout. near the antenna terminal contact pins.There are four components being mounted near to it and this are composed of filter coils and an ESD protection resistor or capacitors.
Nokia C1-01 microSD Memory Card MMC not detected solution
This solution below can be used to fix Nokia C1-01 microSD memory card not detected problem issues, this problem may possibly occurred if the device suffered wet or water damaged. If this happens the Nokia C1-01 will not been able to detect any microSD memory card that inserted to it and it shows on the display the "NO memory card is inserted or memory card not detected".
The solution below below shows the location of certain component that needs to be check or replace to solve nokia C1-01 memory card not detected issues.
Labels: Nokia C1-01
Nokia C1 Solution, C1-01 Earpiece Speaker No Audio Sound
Here's the solution for Nokia C1-01 Earpiece Speaker problem that has no audio Sound can b heard on it during a call is made. If this problem there is a possibility the earpiece speaker is already busted or damaged due to audio signal overdrive. Some factors are of dirty or oxidation build up on the earpiece terminal contact pads.
Nokia C1-01 PCB Board Layout
Here's the Printed Circuit Board Layout of Nokia C1-01. The PCB board components mounting were so very compact in design. Nokia C1-01 PCB board have similarity to nokia C1-02 but unlike nokia c1-01 have VGA camera built on it while on Nokia C1-02 which don't have. The Nokia C1-00 is different from nokia C1-01 which it was built with a dual SIM card slot on it.