Nokia 110 flashing done use usb pinout

    Nokia 110 flashing done use usb as pinout ,view image pinout nokia 110 rm-827 here

    View Log flash for nokia 110 rm-827 :


    Selected FlashSettings : FullFlash
    Check FlashFiles, Please, wait...

    Files Set for Flashing :
    MCU : rm827__03.04.mcusw
    PPM : rm827__03.04.ppm_s1
    CNT : rm827__03.04.image_s1_059N2B2
    Flashing phone now...
    Check files done...
    -> SWversion check skipped : Dead mode selected
    Dead Mode is Selected
    Waiting for USB device...

    -> If Windows say "Unrecognized device" - just reinsert battery
    -> If flashing freeze - reinsert cable and try again
    --- Press phone's power button or insert charger! ---

    Connection opened successfully
    DBG : F00A1FB300020303010100FF
    CPUID : XGOLD 213
    2nd boot Ok, 01
    2nd ready, AA
    Sending Algo
    Algo sent Ok
    BL : Quantum_Bootloader_10.49_M1S1
    Speed accepted, use 6.500.000
    FLASHID : 89008289
    FLIC conf set, RST set
    Boot done!
    Backup enabled, will read all certificates

    Reading CCC
    Reading HWC
    Reading NPC

    IMEI 1 : 351970050618262
    IMEI 2 : 351970050618270
    PCcode : ¯ùCµìЙ

    NPC Certificate saved...
    CCC Certificate saved...
    HWC Certificate saved...

    RPL saved : C:\Program Files\BestNokiaNoDongle v1.01 by stchenslem\Backup\Cert\351970050618262_351970050618270_XG213_CRT.rpl


       ===Flashing [MCU]===
    File : rm827__03.04.mcusw
    Image : rm827__03.04.mcusw_ebl_psi.fls
    Cert block found, sending....
    Cert sent
    Found 5 region(s)
    Processing Region 1/5
    Erase , Start : 0x40000000 , Len : 0x00020000
    Erasing, wait ...
    Erase done, time : 00:00:00
    Write , Start : 0x40000000 , Len : 0x00020000
    Flashing , wait ...
    Region flash done, time : 00:00:00
    Processing Region 2/5
    Erase , Start : 0x40040000 , Len : 0x00020000
    Erasing, wait ...
    Erase done, time : 00:00:00
    Write , Start : 0x40040000 , Len : 0x00020000
    Flashing , wait ...
    Region flash done, time : 00:00:00
    Processing Region 3/5
    Erase , Start : 0x40060000 , Len : 0x00100000
    Erasing, wait ...
    Erase done, time : 00:00:05
    Write , Start : 0x40060000 , Len : 0x00100000
    Flashing , wait ...
    Region flash done, time : 00:00:02
    Processing Region 4/5
    Erase , Start : 0x40280000 , Len : 0x01940000
    Erasing, wait ...
    Erase done, time : 00:02:22
    Write , Start : 0x40280000 , Len : 0x018C0000
    Flashing , wait ...
    Region flash done, time : 00:01:13
    Processing Region 5/5
    Erase , Start : 0x43E20000 , Len : 0x00040000
    Erasing, wait ...
    Erase done, time : 00:00:00
    No write data, skip

       ===Flashing [PPM]===
    File : rm827__03.04.ppm_s1
    Image : package_s1.ppm_ebl_psi.fls
    Cert block found, sending....
    Cert sent
    Found 1 region(s)
    Processing Region 1/1
    Erase , Start : 0x41BC0000 , Len : 0x00600000
    Erasing, wait ...
    Erase done, time : 00:00:24
    Write , Start : 0x41BC0000 , Len : 0x003F1DEC
    Flashing , wait ...
    Region flash done, time : 00:00:10

       ===Flashing [CNT]===
    File : rm827__03.04.image_s1_059N2B2
    Image : package_s1_059N2B2.image.fls
    Cert block found, sending....
    Cert sent
    Found 2 region(s)
    Processing Region 1/2
    Erase , Start : 0x421C0000 , Len : 0x01C60000
    Erasing, wait ...
    Erase done, time : 00:03:51
    Write , Start : 0x421C0000 , Len : 0x01060000
    Flashing , wait ...
    Region flash done, time : 00:00:45
    Processing Region 2/2
    Erase , Start : 0x43E60000 , Len : 0x000E0000
    Erasing, wait ...
    Erase done, time : 00:00:08
    No write data, skip

    Flashing done!
    Total flash time : 00:09:07
    Reboot phone now...

    Reading Phone Info....
    Connected phone -   Nokia 110
    Software Info:     V 03.04 20-04-12 RM-827 (c) Nokia          
    IMEI:  351970050618262
    PPM version :   V 03.04 20-04-12 RM-827 (c) Nokia             S1
    Product code:  059N2B2
    Checking...
    SimLock status : SimLock is Ok
    Security status : Security is Ok
    Read Info Done!
    Settings After Flash Defaults...
    ProductTuneSet...OK!
    SwUpgradeSet...OK!
    Product code update...
    Checking User Certificates...
    Total - 42 certs
    Data exist, skip certificate repair...
    Battery voltage is enough for start
    Set phone to Normal mode...


    Nokia 110 flashing done use usb pinout

    Reviewed by Unknown on Friday, January 25, 2013 Rating: 5

    Contact Form

    Name

    Email *

    Message *

    Theme images by RBFried. Powered by Blogger.